How To Completely Access Your Netgear WiFi Router Settings!

Your Netgear WiFi router stores the settings for your home network. If you want to change something, you have to log into your WiFi router’s firmware. From there, you can change the name of your network, alter the password, can also adjust the security level, you can create a guest network and modify a variety of other options. But how do you get into your Netgear WiFi router to make those changes?

You perform Netgear Router Login of your router’s firmware with the help of a browser. Any browser will do the job. At the URL bar, type the IP address of your WiFi router. Most of the routers use an address of 192.168.1.1. But that’s not always the case, so at first, you want to confirm the address of your Netgear WiFi router.

Open a command prompt from within the Windows. In Windows 7, click on Start button and then type cmd in the search programs and files field and press then press Enter. In Windows 10, just type cmd in the Cortana search field and then press Enter. At the window of the command prompt, type ipconfig at the prompt itself and then press Enter. Scroll to the top of the window until you see a setting for Default Gateway under the Ethernet or Wi-Fi. That’s your router and the number next to it is your WiFi router’s IP address. Note that address.

Now close the window of the command prompt by typing exit at the prompt or clicking X on the pop-up. Type your WiFi router’s IP address in the address field of your internet browser and then press Enter. You are now asked for a username and a password to access your Netgear WiFi router’s firmware. This is either the default username and The default password for your WiFi router or unique username and a unique password that you may have created when you set up the WiFi router.

Online Support for Netgear Router

If you have created a unique username and a unique password and you remember what they are, that’s so great. Just enter them in the appropriate fields, and your Netgear WiFi router’s firmware settings appear. You can now change whatever elements you want. On each screen, you may need to apply any changes before you move to the next screen. When you are done, you may be asked to log in again to your WiFi router. After you have done that, just close your browser.

That might not sound too much difficult, but there’s a catch. What if you do not know the username and the password for logging into your WiFi router? Most of the WiFi routers use a default username of admin and a default password of password. You can try those and see that if they get you in.

If not, some WiFi routers offer a Router Password Recovery option. If this is true of your WiFi router, this option should appear when you enter the incorrect username and password. Typically, this window will ask for your WiFi router’s serial number, which you can find on the bottom or side of the Netgear WiFi router.

Still cannot get in? Then you will need to dig up the default username and the default password for your WiFi router. Your best bet is to run a web search for the name of the brand of your router followed by the phrase default username and default password.

The search results should display the default username and the default password. Now try logging into your WiFi router with those default values. Surely, that will get you in. If not, then that probably means you or someone else changed the default username and the default password at some point. In that case, you may simply want to reset your WiFi router so all settings revert back to their defaults. You will usually find a small Reset button on your WiFi router. Use a pointed object like a pen or paper clip to push in and hold the Reset button for around 10 seconds. Then release the reset button.

You should now be completely able to log into your WiFi router using the default username and password. You can change the network name, the password of the network and the security level. You should also go through each of the screens to see if there are other settings that you wish to modify. Documentation and built-in help should be available to assist you with screens if you are not sure how to set them. Most current WiFi routers also have setup wizards that can take care of some of this work for you.

The process for logging into your WiFi router should be the same whether you use your internet provider’s WiFi router or you purchased your own Netgear WiFi router. It should also be the same whether you use a dedicated WiFi router or a combination modem/router supplied by your ISP.

Finally, should change your WiFi router’s username and password from their default values. This better secures your WiFi router so that only you can access the firmware. Just remember the new values so that you don’t have to struggle to find them or ultimately factory reset the router in the near future.

Online Support for Netgear Router is the most reliable support which you will get for your WiFi router. Our Support for Netgear Router team is always available for your help regarding the WiFi routers. You will get email support as well as chat support on our website.

Robert Williams is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games,internet and new media. He writes for Netgear Router products at netgar router support
admin
Post by Admin

Leave a Reply

Your email address will not be published. Required fields are marked *