PROBLEM FREE

Diagnostics by Chat

Our Tech Experts are just a Chat away
Chat with us Now

PROBLEM FREE

Diagnostics by Mail

Our Tech Experts are just a phone a mail away
Mail to: support@routerpasswordrecovery.com

Services for Netgear Router

Our Services for Netgear Router

Netgear Password Recovery

Netgear recommends you to enable password recovery option while changing the password for the router username admin so that, if you ever forget the password you will be able to recover it. The recovery process is supported in any web browser excluding Safari. You can visit How do I enable the admin password recovery feature on my NETGEAR router?  In Firefox, Chrome and Internet Explorer.

To set up password recovery:

  1. Launch a Web browser from a PC or cell phone that is associated with your router’s network.
  2. In the address bar: Type http://www.routerlogin.net or http://www.routerlogin.com.
    A login window opens.
  3. Enter the router username and password.
  4. The BASIC Home screen shows.
    The username is the admin. The default password is password.
    The username and password are case-sensitive.
  5. Select ADVANCED > Administration > Set Password.
    The Set Password screen appears.
  6. Select the Enable Password Recovery check box.
  7. Select two security questions from the Drop-down menu and answer them for password recovery for the future.
  8. Click the Apply button.

To change your Wi-Fi password or network name (SSID) using Smart Wizard:

  1. Launch a Web browser from a PC or cell phone that is associated with your router’s network.
  2. In the address bar: Type http://www.routerlogin.net or http://www.routerlogin.com.
    A login window opens.
    If you are having problems accessing routerlogin.net, see Router login page cannot be displayed or is blank.
  3. Enter the router username and password.
    The username is the admin. The default password is password.
    The username and password are case-sensitive.
  4. Tap on Setup > Wireless Settings.
  5. Change the name (SSID) and/or password.
  6. Remember to click Apply to save the changes unless it won’t reflect.

Note: If your device gets disconnect from the wireless network then, you need to check the available wireless networks and connect it again with the new password.

Wireless Encryption Protection (WEP) password protection

WEP offers only the most basic network security to your Netgear router Support. It protects your device from unauthorized access so that no outsiders can gain access to your Wi-Fi network. Before going further with WEP, check-on the information discussed below.

  1. At a time, you can only enable one security encryption level i.e., WEP, WPA, etc.
  2. Once you enable any of the encryption levels you quickly immensely secure your network restricting multiple device access to your network through the Wireless Card Access List which is also known as the Access Control List.
  3. After enabling wireless security on your router or AP (Access Point), you need to configure your wireless clients (such as wireless computers and mobile devices) with the same wireless settings. If you did not configure the same settings then, your wireless clients won’t be able to gain access to the network of your router.

Secure your Netgear device with Wireless Encryption Protection (WEP) using Smart Wizar

  1. Launch a Web browser from a PC or cell phone that is associated with your router’s network.
  2. In the address bar: Type http://www.routerlogin.net or http://www.routerlogin.com.
    A login window opens.
    If you are having problems accessing routerlogin.net, see Router login page cannot be displayed or is blank.
  3. Enter the router username and password.
    The username is the admin. The default password is password.
    The username and password are case-sensitive.
  4. In the Smart Wizard, on the left-hand navigation bar, Select Setup > Wireless Settings.
  5. Under Security Options > WEP (Wired Equivalent Privacy).
  6. From Security Encryption (WEP) > Authentication Type, select Automatic. 
  7. From Security Encryption (WEP) > Encryption Strength, select 64-bit or 128-bit
    Note: Configure your wireless computers with the same setting as it is the must.
  8. From Security Encryption (WEP) Key, select Key 1 and enter a key.Note: WEP keys which you need to enter is in hexadecimal digits, which are any combination of 0-9, A-F.
    • If you selected 64-bit under Security Encryption (WEP) > Encryption Strength, then you need to enter 10 hexadecimal digits for your key.
    • If you selected 128-bit under Security Encryption (WEP) > Encryption Strength, then you need to enter 26 hexadecimal digits for your key.
    • Remember to keep these keys with you as they will be required to connect wirelessly to your network.
  9. Click Apply to save the settings.

If you don’t save the changes it won’t reflect any changes you made.

Secure your Netgear device with Wireless Encryption Protection (WEP) using Genie user interface

  1. Launch a Web browser from a PC or cell phone that is associated with your router’s network.
  2. In the address bar: Type http://www.routerlogin.net or http://www.routerlogin.com.
    A login window opens.
    If you are having problems accessing routerlogin.net, see Router login page cannot be displayed or is blank.
  3. Enter the router username and password.
    The username is the admin. The default password is password.
    The username and password are case-sensitive.
  4. Tap on the ADVANCED tab.
  5. Choose Wireless Setup below Setup.
  6. Change the Mode of the network to “Up to 54Mbps” so that WEP will appear under Security Options.
    Configure the 2.4GHz wireless network only for dual-band routers.
    On 5GHz wireless network settings, this Mode is not available.
  7. Under Security Options > WEP (Wired Equivalent Privacy).
  8. From Security Encryption (WEP) > Authentication Type, select Automatic. 
  9. From Security Encryption (WEP) > Encryption Strength, select 64-bit or 128-bit.
    Note: Configure your wireless computers with the same setting as it is the must.
  10. From Security Encryption (WEP) Key, select Key 1 and enter a key.
    Note: WEP keys which you need to enter is in hexadecimal digits, which are any combination of 0-9, A-F.

    • If you selected 64-bit under Security Encryption (WEP) > Encryption Strength, then you need to enter 10 hexadecimal digits for your key
    • If you selected 128-bit under Security Encryption (WEP) > Encryption Strength, then you need to enter 26 hexadecimal digits for your key.
    • Remember to keep these keys with you as they will be required to connect wirelessly to your network.
  11. Click Apply to save the settings.

If you don’t save the changes it won’t reflect any changes you made.

To reset/recover your router password if password recovery is Enabled:

  1. Launch a web browser, In the address field, type  www.routerlogin.net.
    A LOGIN window appears.
  2. Click the CANCEL button
    You are prompted to window to enter the Serial Number of the router if, password recovery is Enabled.
    You can find the serial number of the router on the product label.
  3. Enter the Serial Number of the router.
  4. Tap the Continue Button.
    A screen shows asking for the answers to your security questions.
  5. Enter the saved answers to your security questions.
  6. Tap the Continue Button.
    A screen displays to reset the router password.
  7. Enter the new password and reconfirm the password.
  8. Enter your new security question and answer it for future recovery.
  9. Click the NEXT button.
    Changes applied.
    A screen shows you have successfully reset your password.
  10. Click the Login again button to log back into the router with your new password.
    A login window opens.
  11. Now, Login to the router with the recovered password.

In case you are unable to recall the admin password of the router, then the only way left with you is to perform the factory reset. By doing this your device gets back to its default settings and then, reconfigure the new admin password.

To perform a Factory reset on your device:

  1. Check for the Reset button on the back of your router to Restore Factory Settings.
  2. Using a pin or paper clip, press and hold the Restore Factory Setting or Reset button for up to seven seconds.
  3. Release the Reset Button after seven seconds and wait for your router to get the reboot.
  4. Once the router finished with the Factory Reset Settings, Power light stops and blinking and become solid green in color.
    Note: The Power light on newer router models lights solid white.
  5. The Factory default setting is restored for your Netgear router.

     

FIND US ON THE MAP

LEAVE A MESSAGE

image
https://www.routerpasswordrecovery.com/
#720d97
style1
paged
Loading posts...
/home/u24va4e5z0zj/public_html/routerpasswordrecovery.com/
#
on
none
loading
#
Sort Gallery
on
yes
yes
off
Enter your email here
off
off

What are you waiting for? Call us Now! : +1 (888) 623-3555